DryCap™ Sleeper Caps are designed to fit over standard 4x wood sleepers. The T-slots on the top of the DryCap allow equipment to be attached without penetrating the watertight top surface.
When the DryCap system is being used to anchor smaller equipment to a commercial roof where the loads will be minimal, our economical light duty aluminum cleat is recommended.
When the DryCap system is being used to anchor large equipment to a commercial roof, our heavy duty steel cleat is recommended. These cleats are capable of resisting thousands of pounds of loading in any direction.
T-Brackets are used to attach various components to the RoofScreen DryCap™ System. They may also be used as universal mounting brackets for other types of solid substrates such as I-beams and concrete.
End Caps are used to seal off the ends of DryCap™ Sleeper Covers. Each End Cap has pre-installed drive screws included to make the installation fast and easy. The drive screws line up with extruded screw bosses in the DryCap™. Simply add a small bead of silicone sealant (also included) to the End Cap and snap into place by gently tapping directly on the heads of the drive screws with a small hammer.