The extruded aluminum louver clip provides a concealed mounting point for VisionGuard™ louver blades. The 3" wide clip can be mounted to any flat surface. The distance between clips controls the blade spacing of the louvers and can be adjusted as desired.
When assembled, the inverted angle of the L10 Louver System provide a visual barrier from horizontal view. The standard blade spacing is 6" but can be customized to any desired spacing. This louver system is ideal for use on a mechanical screen to block the view of HVAC equipment.
Installing the L10 Louver System is simple. Rotate the louver arm into the clip and snap into place. To ensure the louvers stay in place under wind load conditions, install one tek screw through the top arm into the clip.
Angled louvers are the most traditional style of louvers with pronounced lines and shadows. Blended with the appropriate architectural style, these louvers can provide a dramatic aesthetic appeal.