The extruded aluminum louver clip provides a concealed mounting point for VisionGuard™ louver blades. The 3" wide clip can be mounted to any flat surface. The distance between clips controls the blade spacing of the louvers and can be adjusted as desired.
When assembled, the slatted rows of the L20 Louver System provide a visual barrier with as much, or as little free open area desired. The standard blade spacing is 6" which leaves a 1/2" gap between blades, but the gap can be customized to any desired spacing. This louver system is ideal for use on equipment screen walls for commercial rooftop applications.
Installing the L20 Louver System is simple. Rotate the louver arm into the clip and snap into place. To ensure the louvers stay in place under wind load conditions, install one tek screw through the top arm into the clip.
The flat vertical face of the slatted louvers can provide a sleek, streamlined effect. When placed close together they will present subtle horizontal shadow lines. When installed with more separation between blades, they provide more of a lattice effect.